Competency Training Courses
Course
Training Courses Programs 2018 |
|
| Public Training Porgram October 2018 to December 2018 Download | |
| Course Name: Triplex Pump (MUD Pumps) & Centrifugal Pumps & Compressors | |
Target Audience: Supervisors, Engineers & Facility/Utility Engineers, Technicians, Operating Personnel or Anyone who require a working level knowledge of pumps & compressors
Date: (Five (5) days Training)
Time : 3pm - 8pm
Venue: Abu Dhabi, UAE
Validity :
Pre-requisite: None
Cost: |
|
| Course Name: IWCF Drilling Well Control Level 2 | |
Target Audience: This training is recommended for anyone who requires a Driller or Supervisor Well Control Certificate.
Date: (4 Days)
Time : 9am - 4pm
Venue: Abu Dhabi, UAE
Validity : 5 Years
Pre-requisite: None
Cost: AED 3500/per person |
|
| Course Name: IWCF Drilling Well Control Level 3 | |
Target Audience: This training is designed for people in critical well control positions on drilling installations as well as onshore roles.
Date: (5 Days)
Time : 9am - 4pm
Venue: Abu Dhabi, UAE
Validity : 2 Years
Pre-requisite: Drilling Well Control Level 2
Cost: AED 4000/per person |
|
| Course Name: Heat Exchanger | |
Target Audience: Mechanical, Process, Planning & Vibration Engineers and Supervisors Course Outcome: Protection & Corrosion problems in Industry Date: Five (5) days Training) Time : 8am-1pm Venue: Mussafah, Abu Dhabi, UAE Cost: US $ 2, 850 |
|
| Course Name : Triplex Pump (MUD Pumps) & Centrifugal Pumps & Compressors | |
Target Audience: Supervisors, Engineers & Facility/Utility Engineers, Technicians, Operating Personnel or Anyone require a working level knowledge of pumps & compressors Course Outcome: The course will provide engineers and technicians with information for the optimal selection, operation and maintenance of positive displacement pumps specially piston pumps (duplex & triplex pumps) as well as positive displacement and dynamic compressors Date: Five (5) days Training) Time : 3 pm- 8pm Venue: Mussafah, Abu Dhabi, UAE Cost: US $ 2, 850 |
|
| Course Name: Boiler & Steam Turbine | |
Target Audience: The course will not only be of great benefit to operation & maintenance staff but also for inspection & process engineering personnel. Course Objective: The course will also highlight the main operational troubles and how to be traced & rectified. Date: (Five (5) Days) Time : 8am-2pm Venue: Mussafah, Abu Dhabi, UAE Cost: US $ 2850/per person |
|
| Course Name: Process Safety Management | |
Target Audience: Operations Managers, Safety and Executive, Process Engineers, Safety and Mechanical, Environmental Management and Technicians Course Objective: Perform day to day process safety management decision making and assess and manage plant risks at all stages. Date: (Five (5) Days) Time : 8am-2pm Venue: Mussafah, Abu Dhabi, UAE Cost: US $ 2850/per person |
|
| Course Name: Abnormal Management Situation | |
Target Audience: Process and Operation Engineers, Supervisor and all those employees who are relevant to attend the training. Course Objective: Demonstrate the hazards associated with poor situational management Date: (Two (2) Days) Time: 8am to 2pm Venue: Mussafah, Abu Dhabi, UAE Cost: US $ 1900/ per person |
|
| Course Name: Process Control for Oil & Gas | |
Target Audience: Gas Plant Field Operators, Oil Station Operators, Control Room Operators, Production Process Supervisors, Gas Process Engineers, Instrument Technician, Supervisor and Process Control Engineers. Course Objective: This course has been designed to provide training on essential components of a control system used in Oil and Gas plant. Date: (Three (3) Days) Time : 8am-2pm Venue: Mussafah, Abu Dhabi, UAE Cost: US $ 2, 250/per person |
|
1 | Oil, Gas, Process / Engineering |
| 1 | An Introduction to Process Plant Start-up & Troubleshooting |
| 2 | API 579 Fitness for Services (FFS) Evaluation of Pressure Vessels and Equipment |
| 3 | Basic Petroleum Technology |
| 4 | A Systems Approach To Maintenance |
| 5 | Basic of Gas Compression Dehydration/Conditioning |
| 6 | Autotronics Modern Automotive Technology/ Mechanics & Electronics |
| 7 | Basic on Gas Compression Principles/Dehydration/Conditioning |
| 8 | Basics on Dehydration / Desalting & Facilities operations |
| 9 | Basic Of Gas / Compression Flow Measurement / Calculation and Reporting |
| 10 | Bearing ,Lubrication & Gearboxes |
| 11 | Boiler Water Treatment & Steam Generation |
| 12 | Boiler Water Treatment & Desalination |
| 13 | Chemical Engineering for Non Chemical Engineers |
| 14 | CRU, Operation, Monitoring and Optimization Skills |
| 15 | Combustion Techniques |
| 16 | Diesel Engine Maintenance |
| 17 | Engineering Fundamentals |
| 18 | Offshore Structural Design |
| 19 | Offshore Structure Type |
| 20 | Emergency Shutdown System |
| 21 | Engineering Drawing , Codes And Standards |
| 22 | Fluid Mechanics |
| 23 | Flare and Relief Systems |
| 24 | Gas Turbine Operations for Operator |
| 25 | Gas Steam Turbine |
| 26 | Gas Production & Processing |
| 27 | Gas Sweetening & SRU Operation Skills |
| 28 | Gas Conditioning and Processing |
| 29 | Hydrogenation & in Process Reaction |
| 30 | Hydrocarbon Production Operation |
| 31 | High- Compression Diesel & Gas Engine Operation, Maintenances & Trouble Shooting |
| 32 | Industrial Gas Turbines Operation, Troubleshooting & Maintenance |
| 33 | Maintenance Planning & Scheduling |
| 34 | Mechanical Seals: Designs, Application, Selection, Installation, Troubleshooting and Maintenance |
| 35 | Natural Gas Conditioning and Processing |
| 36 | Natural Gas Handling Systems & Facilities |
| 37 | Optimization of Equipment / Utilities Operations Techniques |
| 38 | Oil Refining and Petrochemical Process Control Technology |
| 39 | Oil Movement Storage |
| 40 | Oil & Gas Field Operations |
| 41 | Oil-Water Separation. |
| 42 | Overview of the Oil & Gas Industry |
| 43 | Practical Process Control Engineering |
| 44 | Plant Operation, Commissioning & Start-Up |
| 45 | Petroleum Production Problems and Solution |
| 46 | Pneumatic Components and Circuits |
| 47 | Production Operations for Process Engineers |
| 48 | Predictive Maintenance |
| 49 | Preventive Maintenance & Troubleshooting of Rotating Machinery |
| 50 | Operations, Troubleshooting and Control of Pumps, Turbines & Compressors |
| 51 | Machine Alignment and Condition Monitoring |
| 52 | Reliability, Maintainability & Risk |
| 53 | Safe Isolation Of Process Plant Equipment |
| 54 | Sulphur Recovery and Trouble Shooting |
| 55 | Strength and Properties of Material |
| 56 | Safety in Process design |
| 57 | Shell & Tube Heat Exchanger: Mechanical and Thermal Design |
| 58 | Shutdown Planning & Turnaround Management |
| 59 | Supervisory Control & Data Acquisition (SCADA) |
| 60 | Steam Turbine & Hydrogen Generate Maintenance |
| 61 | Strategic Management of Vocational Training Centers in Oil & Gas Industry and Other Sectors of Industry |
| 62 | Quality Assurance Management of Vocational Training Centers in Oil & Gas Industry and Other Sectors of Industry |
| 63 | Shaft Alignment and Vibration Analysis |
| 64 | The Technical and Economics of Water Flooding |
| 65 | Job Safety Analysis in the Oil and Gas industry |
| 66 | Transportation, Marketing and Refining of Crude Oil and Its Refined Products |
2 | Mechanical & Design Engineering |
| 1 | API Pump Design and Selection |
| 2 | Augmentation of Power and Performances: Improvement Strategies for Gas Turbines and Combined Cycles |
| 3 | Boiler Operation & Maintenance |
| 4 | Boilers: Design, Operation, Control and Management |
| 5 | Basic Pumps Technology |
| 6 | Blowers, Compressors and Turbochargers: Operation, Troubleshooting and Maintenance |
| 7 | Centrifugal Compressor & Steam Turbine Design, Operation and Maintenance |
| 8 | Centrifugal Compressor: Maintenance & Trouble Shooting |
| 9 | Compressor & Steam Turbine Technology |
| 10 | Centrifugal Compressor : Maintenance and Failure Analysis |
| 11 | Control & Operation of Centrifugal Gas Compressor |
| 12 | Control Valve Maintenance, Operation & Valve Selection Techniques |
| 13 | Flow Measurements Techniques/ Meter Types and Selection |
| 14 | Fans & Blowers: Selection, Operation, Maintenance and Applications |
| 15 | Flow Measurement & Flow Meters |
| 16 | Fitness for Service (FFS) for Piping & Pressure Vessels |
| 17 | Fundamental of Refinery Catalytic Process |
| 18 | Gas Processing Treatment and Sulfur Recovery |
| 19 | Gas Turbine 1 : Operation Maintenance and Troubleshooting |
| 20 | Gas Turbines 11 : Design, Performance and Reliability |
| 21 | Gas Turbine 111: Advanced Engine Systems; Matching; Performance Deterioration and Recovery |
| 22 | Gas Turbine Protection: Inspection Control, and Monitoring |
| 23 | Gasoline Blending in Refineries |
| 24 | Gas & Steam Turbines Plants:Design, Performance and Monitoring |
| 25 | Heat Exchangers: Shell and Tube Heat Exchangers Design, Operation, Control and Troubleshooting |
| 26 | High – Compression Diesel and Gas Engines: Maintenance and Troubleshooting |
| 27 | Improving the Performance & Reliability of Fired Heater & Boiler |
| 28 | Machinery Failure Analysis and Troubleshooting |
| 29 | Modern Automotive Technology:{Autotroniucs} |
| 30 | Mechanical Seals Troubleshooting and Maintenance |
| 31 | Instrumentation and Control: Sensors, Actuators, and Industrial Applications |
| 32 | Steam Turbine Maintenance: Turbine ,generator, maintenance and troubleshooting |
| 33 | Plant Operation, Commissioning & Start-Up |
| 34 | Predictive Maintenance |
| 35 | Power and Desalination Plants: Based on Gas Steam Turbines |
| 36 | Piping and valves: Design, Construction, Operation, Protection and Integrity |
| 37 | Pipeline Fabrication and Maintenance |
| 38 | Process Equipment, Fired Heater, Air Cooler s, Heat Exchangers, Pumps, Compressors. |
| 39 | Process Plant Start up , Commissioning & Troubleshooting |
| 40 | Pumps and Compressors: Operation, Troubleshooting and Maintenance |
| 41 | Pumps Operation, Maintenance & Troubleshooting |
| 42 | Pumps & Compressors In-Service (Operation & Maintenance ) |
| 43 | Pumps Technology for Juniors |
| 44 | Reliability, Maintainability & Risk |
| 45 | Refinery Process Operation, Control System &Troubleshooting |
| 46 | Refining Process and Petroleum Products |
| 47 | Refinery Equipments Operation and Troubleshooting |
| 48 | Rotating Equipment: Preventive and Predictive Maintenance |
| 49 | Surface Production Operation |
| 50 | Shell & Tube Heat Exchanger: Mechanical and Thermal Design, Troubleshooting and Maintenance |
| 51 | Trouble Shooting of Modern Refinery |
| 52 | Turbine Steam- Path Damages Troubleshooting |
| 53 | Valve Maintenance & Technology |
| 54 | Valves: Safety Relief Valves: Selection, Operation and Maintenance |
| 55 | Valve Types: Operation & Applications |
| 56 | Water Injection Process |
| 57 | Water treatment for plant utility , Off site & Cogeneration |
3 | Instrumentation & Control Engineering |
| 1 | Analytical Instrumentation |
| 2 | Automatic Process Control |
| 3 | Advanced Process Measurements Course |
| 4 | Advanced Microprocessor Based Power System Protection |
| 5 | Applied Electronics |
| 6 | Advanced DCS Operation |
| 7 | Advanced Process Control & Instrumentation |
| 8 | Anti-Surge - CCC For Operations |
| 9 | Anti-Surge - CCC For Control (for Instrument Tech) |
| 10 | Basic Instrumentation & DCS |
| 11 | Basics of Instrumentation |
| 12 | Basics of Sensors |
| 13 | Boiler Operation & Control |
| 14 | Control & Operation of Centrifugal Gas Compressor |
| 15 | Controllers & Control Loops |
| 16 | Control Valve Maintenance, Operation & Valve Selection Techniques |
| 17 | Distributed Control Systems (DCS) |
| 18 | (DCS) Troubleshooting |
| 19 | Flow Measurement & Flow Meters |
| 20 | Flow Measurement & Flow Meters |
| 21 | Fiscal and Allocation Metering |
| 22 | Introduction To Instrument and Control Engineering |
| 23 | Industrial Process Control |
| 24 | Industrial Valve and Actuators |
| 25 | Instrumentation and Control: Sensors, Actuators, and Industrial Applications |
| 26 | Oil Refining and Petrochemical Process Control Technology |
| 27 | Proportional + Integral +Derivative Control Action |
| 28 | Pneumatic System & Troubleshooting |
| 29 | Principles of Calibration |
| 30 | Principles of Control |
| 31 | Programmable Logic Controllers (PLC) |
| 32 | P.L.C Fundamental |
| 33 | Process Control Instrumentation |
| 34 | Reading P& ID |
| 35 | Supervisory Control & Data Acquisition (SCADA) |
| 36 | Sensors & Actuator and Process Control |
| 37 | Temperature, Pressure & Level Measurements |
| 38 | Valves: Safety Relief Valves: Selection, Operation and Maintenance |
| 39 | Valve Types: Operation & Applications |
4 | Industrial Engineering |
| 1 | Changing Challenges for the Operations Managers |
| 2 | Cost Accounting for Engineers and Technicians: A Managerial Emphasis |
| 3 | Creating Value through Operations Management and Supply Chains |
| 4 | Casting Technology |
| 5 | Engineering Economy |
| 6 | Fundamentals of metal cutting and High speed Machining |
| 7 | Foundations for Introducing and Implementing Total Productive Maintenance (TPM) |
| 8 | High speed Machining: |
| 9 | Introducing and Implementing Preventive Maintenance Programs |
| 10 | Just-In-Time & Lean Systems :Japanese Management in Comparison with Western Experience |
| 11 | Material Properties |
| 12 | Maintenance planning and Management |
| 13 | Manufacturing Technology |
| 14 | Manufacturing Processes |
| 15 | Managers Aiming for Zero Machine Breakdowns |
| 16 | New Orientations for Inventory Control & Management |
| 17 | Numerical Methods for Engineers |
| 18 | Operations and Master Production Scheduling |
| 19 | Planning and Controlling Operations and Supply Chains |
| 20 | Product Design and Development |
| 21 | Preventive Maintenance Planning, Metrics and Benchmarking |
| 22 | Quality Experts Aiming for Zero Defect Products and Processes |
| 23 | Strategic Planning and Strategic Management |
| 24 | Seven Magnificent Tools of Statistical Process Control (SPC) |
| 25 | Stochastic Processes and Queuing Systems |
| 26 | Systematic Approaches in Process Design, Analysis and Decision Making |
| 27 | Total Productive Maintenance (TPM) Implementation Steps and Process Improvement Tools |
| 28 | Use of Computerized Maintenance Management Systems (CMMS ) for Maintenance Planning and Management |
| 29 | Welding Technology: Metallurgy Aspects, Safety, and Quality |
5 | Petroleum Reservoir and Drilling Courses |
| 1 | Advanced Well Control |
| 2 | Basic Reservoir Engineering |
| 3 | Basic Petroleum Engineering to non-Engineering staff |
| 4 | Carbonate Reservoirs |
| 5 | Cased Hole Log Interpretation/ Production Logging |
| 6 | Completion & Well Intervention |
| 7 | Coiled Tubing Operations |
| 8 | Drill String Design |
| 9 | Drilling & Work over Operations |
| 10 | Drilling Engineering and Well Planning |
| 11 | Environmental Reservoir in the Oilfield |
| 12 | Enhanced Oil Recovery |
| 13 | Flow Assurance |
| 14 | Field Monitoring |
| 15 | Geostatistics |
| 16 | High Temperature High Pressure Well |
| 17 | Horizontal Well Technology |
| 18 | Introduction to Completion Design |
| 19 | Open Hole Log Interpretation |
| 20 | Production Operations |
| 21 | Project Management in E&P in Oil and Gas Industry |
| 22 | Petroleum Production Problems and Solution. |
| 23 | Production Technology |
| 24 | PVT and Phase Behaviour of Reservoir Fluids |
| 25 | Production Logging and Reservoir Monitoring |
| 26 | Reservoir Engineering |
| 27 | Reservoir Management |
| 28 | Reservoir Characterization |
| 29 | Reservoir Simulation (Introduction) |
| 30 | Well Testing |
| 31 | Water flooding |
| 32 | Well Design and Completion |
| 33 | Well Composite, Construction Integrity & Completion |
| 34 | Work Over Planning and Well Servicing |
| 35 | Well Stimulation |
6 | Electrical Engineering |
| 1 | Analysis and Control of Industrial Processes |
| 2 | A.C. & D.C. Motor Applications (Level Basic) |
| 3 | Basic Machines (A.C. & D.C.) |
| 4 | Contents of the Grounding and Measuring Instrumentation Program |
| 5 | Conducting Safety Meeting |
| 6 | Distributed Control System (DCS) |
| 7 | Distribution Network Design and Planning |
| 8 | Electrical Equipment & Control Systems |
| 9 | Power Plant Performance Monitoring |
| 10 | Distribution Planning & Reliability Assessment |
| 11 | “UPS’ Installation ,Operation & Troubleshooting |
| 12 | The Grounding & Measuring Instrumentation Program |
| 13 | Substation Design |
| 14 | Underground Power Cable |
| 15 | Earthing and Bonding |
| 16 | The Cables |
| 17 | 11KV/ 415 Operation of Electrical Equipment |
| 18 | Electrical Safety |
| 19 | Electrical Equipment – Inspection |
| 20 | 33 KV /11 KV Substation Operation |
| 21 | Distribution System Planning in Electrical Network |
| 22 | 33 KV Substation Circuit Breaker Maintenance |
| 23 | Electrical Power System Planning |
| 24 | Electrical Grounding |
| 25 | Electrical Inspection & Testing |
| 26 | Electrical Installations |
| 27 | Electrical Equipment – Installation & Testing |
| 28 | Electrical Power Systems Quality & Troubleshooting |
| 29 | Electrical Protection and Protective Relays |
| 30 | Electrical Safety |
| 31 | Electrical Safety and Hazardous Area Classification in the Petrochemical Industry |
| 32 | Electrical Transformers: Operation, Testing and Maintenance |
| 33 | Electrical Equipment Installation, Maintenance & Troubleshooting |
| 34 | Electrical Protection and Coordination |
| 35 | Energy Saving and Power Factor Improvement |
| 36 | Fault Analysis in Power System |
| 37 | High Voltage Operational Safety for Engineers |
| 38 | Maintaining & Troubleshooting Electrical Equipment &Technicians(OSHA, NFPA & EN Standards) |
| 39 | M.V Switchgear |
| 40 | Modern Electric Power Systems: Generation, Transformation, Transmission, Distribution, Substation & Utilization: Design, Modeling, Analysis, Planning, Monitoring, Control, Maintenance & Troubleshooting |
| 41 | Operation & Maint. Of C.B. & Switchgear |
| 42 | Power Cables Characteristics& Applications |
| 43 | Power System Harmonics, Earthing and Power Quality |
| 44 | Practical Motor Protection, Testing, Control & Maintenance |
| 45 | Preventive & Predictive Maintenance for Overhead Lines |
| 46 | Principles of the Maintenance of Electrical Switchgear |
| 47 | Substation Operation and Maintenance Techniques |
| 48 | Transformer & Generator Protection, Testing & Maintenance |
| 49 | Power System Protection |
| 50 | Switchgear Operation and Maintenance |
7 | Civil Engineering |
| 1 | Advanced Structural Analysis |
| 2 | Advanced Mechanics of Materials |
| 3 | Advanced Steel Structure Design, Construction and Inspection |
| 4 | Advanced Structural Mechanics |
| 5 | Advanced Steel Structure Design and Construction |
| 6 | Advanced New Materials in Concrete Construction |
| 7 | Concrete Quality Control |
| 8 | Civil Engineering Skill for Non-Civil Engineers |
| 9 | Design and Construction of Steel Structure |
| 10 | Decision Making and Decision Tree Technique |
| 11 | Essential material for concrete construction and repair |
| 12 | Concrete Quality control |
| 13 | Matrix Analysis of Structures |
| 14 | Principal of Civil Engineering for Non-Civil Engineering |
| 15 | Reinforced Concrete I |
| 16 | Reinforced Concrete II |
| 17 | Risk Assessment and Decision Making for Petroleum Investment |
| 18 | Repair and Maintenance of the Reinforced Concrete Structure |
| 19 | Stability of Structures |
| 20 | Special Topics (Mechanics of Composite Materials) |
| 21 | Strength of Materials |
| 22 | Structural Steel Design (using AISC-Specifications) |
| 23 | Structural Mechanics for Architects |
| 24 | Structural Analysis for Architects |
| 25 | Structural Design for Architects |
| 26 | Supervising Master Thesis |
8 | Health, Safety & Environment |
| 1 | Accident Investigation / Reporting and Lessons Learn |
| 2 | ALARP Assessment & Risk Based Decision Making |
| 3 | Availability, Reliability &b Maintainability |
| 4 | Advanced Emergency Respond |
| 5 | Awareness Of LSA, Ionizing & Non-Ionizing Radiation |
| 6 | Air Pollution Control |
| 7 | Basic Corrosion |
| 8 | Behavioural Safety Audits |
| 9 | Business Continuity Management |
| 10 | Cleaning of Drinking Water System with Wessoclean |
| 11 | Change Management for Process Safety |
| 12 | Computer –Aided Safety Management |
| 13 | Chemicals Handling & Industrial Safety: Classification of Hazardous Materials & Their Impact on Human Health |
| 14 | Corrosion for Non Corrosion Engineers |
| 15 | Corrosion of Iron & Steel Structures |
| 16 | Design of Plant Operation: Normal & Recovery |
| 17 | Degermination and Disinfection with Wessoclean (Air Application) |
| 18 | Environmental Management System (EMS) |
| 19 | Energy Conservation and Management |
| 20 | Enterprise Safety Knowledge Management |
| 21 | Environmental System (ISO 14001) |
| 22 | Emergency Preparedness |
| 23 | Fundamentals of Non-Destructive Testing |
| 24 | Fault Tree Analysis / Event Tree Analysis |
| 25 | Failure Mode Effect Analysis |
| 26 | Fitness for Service |
| 27 | HSE Supervisory (Leadership) Training |
| 28 | HSE Management for Managers |
| 29 | Hazardous Area Classification |
| 30 | Handling Storage & Transportation of Dangerous Goods |
| 31 | Handling Hazardous Waste |
| 32 | Hazard Identification and Risk Control |
| 33 | HSE Excellence Leading For Supervisors |
| 34 | Human Factors Engineering |
| 35 | HAZOP Process Hazard Analysis for Supervisor |
| 36 | Health & Safety in the Workshop |
| 37 | Health & Safety in Engineering Projects |
| 38 | Health Safety & Environment |
| 39 | HSE & QMS Induction & Updates |
| 40 | Hazard Identification and Risk Control For Senior Managers |
| 41 | Human Reliability Analysis |
| 42 | HSE-MS, HSE cases and Risk Management |
| 43 | Introduction To Safety Systems |
| 44 | Industrial Fire & Accident Prevention |
| 45 | Industry & Company Codes & Standards |
| 46 | Integrated HSE & QMS |
| 47 | Industrial Safety and Health: Working in a Healthy and Safe Environment |
| 48 | Industrial Behavior and Relations |
| 49 | IOSH Managing Safely |
| 50 | IEMA Associate Certificate in Environmental Management |
| 51 | Learn from Past Experiences: Accident / Incidents |
| 52 | Leadership of Hazard & Operability Study |
| 53 | Load Forecasting and Upgrade system |
| 54 | Loss Control |
| 55 | Management of Major Emergencies |
| 56 | Metallurgy for Non-Metallurgists |
| 57 | Maritime Incident Investigation & Root Cause Analysis |
| 58 | Major Emergency Management & Control |
| 59 | Operating Procedure |
| 60 | Oil & Gas Safety, Practices in Japanese Industry |
| 61 | Plant Safety Information Management Program |
| 62 | Process Shutdown & Relief Systems |
| 63 | Oil Spill Response, Modeling &Clean Up Course |
| 64 | Oil & Gas Safety, Practices in Japanese Industry |
| 65 | Pressure Hose Safety Course |
| 66 | Process Control & Safety Systems |
| 67 | Process Modeling & Simulation |
| 68 | Process Hazard Analysis , HAZOP Study for Team Leaders |
| 69 | Plant Safety Information Management Program |
| 70 | Process Control & Safety Systems |
| 71 | Preventing Human Error |
| 72 | Process Safety for Operation Safety Engineers |
| 73 | Qualitative & Quantitative Fault Propagation Analysis |
| 74 | Revalidating Process Hazard Analysis (PHA) |
| 75 | Risk Assessment within Production Operation |
| 76 | Root Cause Analysis |
| 77 | Review of Reliability Standards (IEC 61709) |
| 78 | Reliability Centered Maintenance |
| 79 | Risk Assessment & Management |
| 80 | Risk Management in Engineering Projects |
| 81 | Safety Cases & Risk Assessment |
| 82 | Safety Engineering Education |
| 83 | Safety Instrumented Systems |
| 84 | Safety Auditing |
| 85 | Safety Regulations |
| 86 | Safety Assessment for Supply Chain Production Systems |
| 87 | Safety Audit & Site Inspection |
| 88 | Safe Lifting & Materials Handling |
| 89 | Safety in the Oil & Gas Safety Industry |
| 90 | Oil & Gas Safety, Practices in Japanese Industry |
| 91 | Safety Engineering Education |
| 92 | Safety Instrumented Systems |
| 93 | Safe Transportation & PPE |
| 94 | Tutorial On HAZID, Safety Assessment Method, Hands-On Practice |
| 95 | Treatment of Municipal & Industrial Sewage Sludge |
| 96 | Waste Management & Chemical Handling |
| 97 | Workplace Risk Assessment & Safe Systems of Work |
| 98 | Waste Water Treatment |
| 99 | Working Safely in Hazardous Area |
| 100 | Waste Handling & Waste Treatment |
| 101 | What If Techniques |
9 | Incident Command System (ICS) |
| 1 | Application of HAZOP and What-If Safety Review |
| 2 | Conduct incident / Accident Analysis |
| 3 | Discussions, Understanding, and Applications of OSHA Standards |
| 4 | Design and Engineering of Safe Plant Operation |
| 5 | Human Engineering for Safe Plant Operation |
| 6 | Introduction to the Incident Command System |
| 7 | Incident Command System Organization |
| 8 | Incident Facilities |
| 9 | Incident Resource Management |
| 10 | Incident Command System Assignments |
| 11 | Learning from Past Experience Using Accidents Database |
| 12 | Managing Corporate Safety Knowledge for Improved Risk Management |
| 13 | Reliability-Centered Maintenance Practices |
| 14 | Safe Process Plant Design Using Activity MO |
| 15 | Self-Assessment and Auditing of HSE Management System |
| 16 | Systematic Approach for Incident and Accident Analysis |
| 17 | Understanding & Implementation of HSE Management System |
| 18 | Understanding and management of Safety Interlock Systems |
10 | Corrosion Courses |
| 1 | Asset Integrity Management in Oil & Gas Industries |
| 2 | Cathodic Protection Systems |
| 3 | Corrosion Awareness |
| 4 | Corrosion for Non-Corrosion Engineers |
| 5 | Corrosion Metallurgy & Failure Prevention |
| 6 | Corrosion in the Oil & Gas Industry |
| 7 | Corrosion Monitoring & Inhibitor Injection in Oil & Gas Fields |
| 8 | Corrosion Control in Refining Industry |
| 9 | Corrosion Control in Boiler & Steam Generation Systems |
| 10 | Corrosion Prevention in Oil & Gas Industry |
| 11 | Corrosion of Reinforcing Steel and Reinforced Concrete |
| 12 | Corrosion Resistant Painting, Coating and Lining |
| 13 | Fundamentals of Industrial Coatings & Non-Metallic materials application in Chemical & Petrochemical Industries |
| 14 | Material Selection for Oil & Gas, Refineries and Desalination Plants |
| 15 | Integrity Management in Oil & Gas Industries |
| 16 | Microbiological Corrosion in Oilfields |
| 17 | Protective Coatings for Steam & Gas Turbine |
| 18 | Corrosion Inhibition Principles & Management |
11 | Management Development Courses |
| 1 | Advanced Methods for Time and Cost Control of Project |
| 2 | Appraisal Training |
| 3 | Assessor Training |
| 4 | Basics of Business Writing Skills |
| 5 | Behavioural Interviewing For Performance Management |
| 6 | Behavioural Interviewing for Recruitment, Appraisal, and Counselling |
| 7 | Coaching and Appraisal |
| 8 | Coaching & Mentoring |
| 9 | Competencies Management |
| 10 | Creative & Innovative Leadership |
| 11 | Creativity and Mind Mapping |
| 12 | Conflict Management |
| 13 | Communication, Negotiation and Presentation Skills |
| 14 | Communication & Dealing with Others |
| 15 | Counseling Skills For HR Professionals |
| 16 | Critical Competencies for Administrators and Secretaries |
| 17 | Customer Focus |
| 18 | Contract & Vendor Management |
| 19 | Customer Service |
| 20 | Competitive Intelligence & Benchmarking |
| 21 | Development Training for Executive Assistants |
| 22 | Effective Meeting & Time Management |
| 23 | Effective Thinking & Planning Strategies |
| 24 | Excellence in Internal and External Customer Service |
| 25 | Effective Performance Appraisals and successful Implementation |
| 26 | Estimating Techniques for Engineering Projects |
| 27 | Enhancing Leadership Skills |
| 28 | Emotional Intelligence |
| 29 | Effective Communication and Interpersonal Skills |
| 30 | Effective Presentation Skills |
| 31 | Experiencing NLP |
| 32 | Fundamentals of Human Resources Management |
| 33 | Human Resource Management for Women |
| 34 | Human Performance Management |
| 35 | Interviewing for Recruitment, Appraisal & Performance Counselling |
| 36 | Innovation and New Techniques in HR Management |
| 37 | Interviewing for Recruitment and Appraisal |
| 38 | Improving Personal Effectiveness |
| 39 | Influencing Skills |
| 40 | Interpersonal & Communication Skills |
| 41 | Leading and Managing Organizational Change |
| 42 | Leadership and Leadership Styles |
| 43 | Lateral Thinking |
| 44 | Leadership & Effective Team Building |
| 45 | Leadership, Empowerment, and Delegation |
| 46 | Leadership Development / Personal Growth |
| 47 | Managing Chaos Setting Priorities Under Pressure |
| 48 | Motivating & Increasing Work Productivity |
| 49 | Managing the Training Function |
| 50 | Market Research |
| 51 | Managing Multiple Tasks |
| 52 | Mentoring Skills |
| 53 | Motivating Your Staff for Better Performance |
| 54 | Managing and Working With Difficult People |
| 55 | Managing Training and Development |
| 56 | Mentoring, Coaching & Counselling |
| 57 | Mentoring and Instructor Training |
| 58 | Negotiation Skills |
| 59 | Office Management and Effective Administrators Skills |
| 60 | Personal Effectiveness |
| 61 | Project Planning Scheduling & Control |
| 62 | Problem Solving & Decision Making |
| 63 | Performance Management & Productivity Improvement |
| 64 | Presentation Skills |
| 65 | Procurement Management System |
| 66 | Public Speaking |
| 67 | Planning, Organizing & Control |
| 68 | Supervisory Management and Leadership Competencies |
| 69 | Supervision Skills |
| 70 | Self Development |
| 71 | Secretarial Excellence Skills |
| 72 | Secretarial Intermediate Skills |
| 73 | Secretarial Junior Skills |
| 74 | Strategic Training Needs Analysis, Evaluation & Implementation |
| 75 | Supervisory Leadership |
| 76 | Strategic Leadership |
| 77 | Supervisory Skills for New Managers |
| 78 | Telephone Skills |
| 79 | Team Work |
| 80 | The Key Skills of Training Assessor |
| 81 | Time & Stress Management |
| 82 | Techniques for Interviewing, Testing and Effective Selection |
| 83 | Technical Report Writing Skills |
| 84 | Train the Trainer-Facilitation Skills |
| 85 | The 7 Habits |
| 86 | Team Building |
| 87 | Win-Win Negotiation Skills |
| 88 | Work Ethics |
| 89 | The Innate Directed Diet - 7 steps to reaching your ideal weight without dieting fads |
| 90 | S.O.S - Save Our Spines - 10 daily postural & exercise essentials to optimize your back |
| 91 | The 4 B's to Beating stress and Bringing Balance into your home and work life |
| 92 | Cracking the Kid Code - 5 techniques for transforming your child from school hater, to school appreciator |
| 93 | Emotional Self Suficiency Training |
12 | Project Management Courses |
| 1 | Advanced Construction Management, Contracting & Project Execution. |
| 2 | Construction Scheduling, Resources and Site Operations Planning. |
| 3 | Comprehensive Preparation for the Project Management Professional (PMP) Certificate (With Sample Exams). |
| 4 | Comprehensive Project Planning & Management: Route for Success |
| 5 | Capital Project Management, Economics & Cost Engineering |
| 6 | Contract Management |
| 7 | Contract Management Principles & Practices Course |
| 8 | Introduction to Project Management |
| 9 | Effective Risk Assessment & Management in Engineering Projects |
| 10 | Project Risk Management |
| 11 | Managing Projects |
| 12 | Project Management for Intermediate & Advanced Levels. |
| 13 | Preparation for the Project Management Professional (PMP) Certificate. |
| 14 | Quality for Project Engineer Course |
| 15 | Project Planning, Scheduling & Control |
| 16 | Project Management Essential |
13 | Supply Chain Management |
| 1 | Auditing Supply Chain |
| 2 | Driving Business Change Through People |
| 3 | Dangerous Goods Handling, Transportation and Storage |
| 4 | Introduction To Logistics 3- Days |
| 5 | Enabling Supply Chains Through E-Business |
| 6 | Management & Purchasing Strategies and Cost Reduction |
| 7 | Managing International Trade and Freight Forwarding |
| 8 | Performance drivers in the Supply Chain |
| 9 | Materials & Supply Chain Flows |
| 10 | Practical Forecasting |
| 11 | Practical Benchmarking |
| 12 | Practical Project Management |
| 13 | Practical Negotiating |
| 14 | Practical Spreadsheets Modelling |
| 15 | Practical Inventory Techniques |
| 16 | Purchasing : The A To Z Course |
| 17 | Purchasing Strategies ,Tactics and Cost Reduction |
| 18 | The Effective Inventory Manager |
| 19 | The Effective Distribution Manager |
| 20 | The Effective People Manager |
| 21 | The Effective Logistics Manager |
| 22 | The Effective Transport Supervisor |
| 23 | The Effective Supply Chain Manager |
| 24 | Warehousing Management |
| 25 | The Effective Warehouse Manager |
14 | Finance & Accounting |
| 1 | Advanced Financial Statements Analysis |
| 2 | Advanced Accounting |
| 3 | Advanced Excel Applications in Business Analysis |
| 4 | Advanced Product Pricing & Market Strategy |
| 5 | Advanced Accounting & Finance |
| 6 | Balance Scorecard & Key Performance Indicator |
| 7 | Basic Accounting |
| 8 | Capital Recovery & Fixed Assests Valuation |
| 9 | Budgeting, Forecasting and Business Planning |
| 10 | Finance For Non-Finance Staff |
| 11 | Finance Basics |
| 12 | Fundamentals of Finance & Accounting |
| 13 | Finance For Non- Finance Mangers |
| 14 | Financial Planning and Control |
| 15 | Effective Budgeting and Cost Control |
| 16 | Financial Report Writting Analysis |
| 17 | Financial Decision Making |
| 18 | International Accounting Standards |
| 19 | Finance & Cash Flow Management |
| 20 | Purchasing Stratégies and Cost Reduction |
| 21 | Intermediate Accounting |
More Courses
- OPITO Approved
- General Safety
- Under TRL
- Fire Fighting
- H2S & B.A
- First Aid
- HSE
- STCW
- Offshore Survival
- Defensive Driving
- Oil Spill
- Security
- Instructor's
- Helicopter Landing
- ALL course
- Competency
Tel : +971-2-5552034 Ext - 205 (Miss.Tatyana)
Fax: +971-2-5547717 (Attention Miss.tatyana)
Email: tatyana@etsdc.com
